**•How To Make Skyrim Run Better On PS3!•**
Tired of the game-breaking lag with your 20meg Skyrim save files? Here is a guide to help prevent these issues:
1) "Deleting Excess Save Files"
•Go to "Save Data Utility" on the XMB & check how many Skyrim saves Du have. If Du have Mehr then three, Löschen them. Du must only have three saves maximum. Also make sure to Löschen any "Auto-Saves."
2) "Freeing Up HDD Space"
•Check how many GBs Du have left on your console. Go to "Settings," "System Setting" & then open "System Information." It will Zeigen Du how many GBs Du have used and how much Weltraum Du have left. e.g: 233/320GB. The number on the left will Zeigen how many GBs Du have left. If Du don't have much, scroll across the XMB to "Game Data Utility" and Löschen any game's data that Du aren't playing anymore/lately. Don't worry, Game data is only "install data," when Du decide to play the game again Du will just have to install again and your saves will not be affected. If Du also want to copy & Löschen game saves, scroll down from "Game Data Utility" and select "Save Data Utility." If Du have important saves, don't worry about them. Saves take up hardly any Weltraum compared to "Game Data." If Du want to free-up as much Weltraum as possible, Du can plug a USB into the PS3 and copy "non-copy-protected" saves to your thumb drive. That way Du can Löschen them off of Du system and just copy them back from the USB when Du want to play them again. #NOTE# Du can copy some "Game Data Utility" as well as "Save Data Utility" if Du want to do both. Make sure Du have as much Weltraum as possible because Skyrim needs quite a bit of HDD Weltraum to run properly. My Skyrim Game Data is about 4-5 GBs.
2) Tweaking "Game & Display Settings"
•Sometimes "Graphical Enhancement" settings can interfere with gameplay performance such as frame-rate dips, glitches & lag in massive games like Skyrim. (Don't worry, Du will be changing these settings back later!)
#Temporarily Disable The Following:
*Go to "Game Settings" and turn "PS Smoothing" to "Off."
*Scroll down to "Display Settings" and disable/limit all the HDMI Features:
- Super White
- RGB Range to "Limited."
- Cross-Colour Reduction Filter
- Deep Colour Output
3) "Permanently Disabling All In-Game Auto Saves & Testing Performance"
•After you've put all of the ^ *above settings to either "off" oder "limited," insert your Skyrim disc and load it up.
Once the game has loaded, go to setting and disable all Auto-Saves listed below (if Du haven't already.)
*Save on Wait
*Save on Fast Travel
*Save on Rest
*Save on Character Menu
^ *This will prevent in-game stuttering when your system forces your game to save automatically. It may also decrease Wird geladen times significantly as well as preventing auto-save files from filling up your load & save menus.
4) "System Restart & Re-Enabling Settings"
•When you've disabled all of the "Auto-Save" options, exit the menu and test how your game is running. Is it good, OK, annoying oder terribly unplayable? Most likely it'll either be worse oder a even a tiny bit better than it was before Du changed the settings. If it's at least a little better, it'll probably still be, well...BAD!
Don't worry! A system restart and another change of settings should fix that right up!
*Quit the game and turn the PS3 off then on again.
*When the PS3 has turned on again, go to back to "Game" and "Display Settings" to re-enable the settings Du disabled.
#NOTE# After this Du can restart the system again if Du want to. Du do not have to.
With your re-enabled "Graphic Settings," load up Skyrim again and enjoy the (at least temporary) smoother, consistent frame-rate & a lot less lag! ;) *^_^*
This Artikel is by:
~*•Žÿłįçę*•~
Tired of the game-breaking lag with your 20meg Skyrim save files? Here is a guide to help prevent these issues:
1) "Deleting Excess Save Files"
•Go to "Save Data Utility" on the XMB & check how many Skyrim saves Du have. If Du have Mehr then three, Löschen them. Du must only have three saves maximum. Also make sure to Löschen any "Auto-Saves."
2) "Freeing Up HDD Space"
•Check how many GBs Du have left on your console. Go to "Settings," "System Setting" & then open "System Information." It will Zeigen Du how many GBs Du have used and how much Weltraum Du have left. e.g: 233/320GB. The number on the left will Zeigen how many GBs Du have left. If Du don't have much, scroll across the XMB to "Game Data Utility" and Löschen any game's data that Du aren't playing anymore/lately. Don't worry, Game data is only "install data," when Du decide to play the game again Du will just have to install again and your saves will not be affected. If Du also want to copy & Löschen game saves, scroll down from "Game Data Utility" and select "Save Data Utility." If Du have important saves, don't worry about them. Saves take up hardly any Weltraum compared to "Game Data." If Du want to free-up as much Weltraum as possible, Du can plug a USB into the PS3 and copy "non-copy-protected" saves to your thumb drive. That way Du can Löschen them off of Du system and just copy them back from the USB when Du want to play them again. #NOTE# Du can copy some "Game Data Utility" as well as "Save Data Utility" if Du want to do both. Make sure Du have as much Weltraum as possible because Skyrim needs quite a bit of HDD Weltraum to run properly. My Skyrim Game Data is about 4-5 GBs.
2) Tweaking "Game & Display Settings"
•Sometimes "Graphical Enhancement" settings can interfere with gameplay performance such as frame-rate dips, glitches & lag in massive games like Skyrim. (Don't worry, Du will be changing these settings back later!)
#Temporarily Disable The Following:
*Go to "Game Settings" and turn "PS Smoothing" to "Off."
*Scroll down to "Display Settings" and disable/limit all the HDMI Features:
- Super White
- RGB Range to "Limited."
- Cross-Colour Reduction Filter
- Deep Colour Output
3) "Permanently Disabling All In-Game Auto Saves & Testing Performance"
•After you've put all of the ^ *above settings to either "off" oder "limited," insert your Skyrim disc and load it up.
Once the game has loaded, go to setting and disable all Auto-Saves listed below (if Du haven't already.)
*Save on Wait
*Save on Fast Travel
*Save on Rest
*Save on Character Menu
^ *This will prevent in-game stuttering when your system forces your game to save automatically. It may also decrease Wird geladen times significantly as well as preventing auto-save files from filling up your load & save menus.
4) "System Restart & Re-Enabling Settings"
•When you've disabled all of the "Auto-Save" options, exit the menu and test how your game is running. Is it good, OK, annoying oder terribly unplayable? Most likely it'll either be worse oder a even a tiny bit better than it was before Du changed the settings. If it's at least a little better, it'll probably still be, well...BAD!
Don't worry! A system restart and another change of settings should fix that right up!
*Quit the game and turn the PS3 off then on again.
*When the PS3 has turned on again, go to back to "Game" and "Display Settings" to re-enable the settings Du disabled.
#NOTE# After this Du can restart the system again if Du want to. Du do not have to.
With your re-enabled "Graphic Settings," load up Skyrim again and enjoy the (at least temporary) smoother, consistent frame-rate & a lot less lag! ;) *^_^*
This Artikel is by:
~*•Žÿłįçę*•~
